Differences

This shows you the differences between two versions of the page.

--- magnimar:movement [2019/02/09 12:17] – created sam
+++ magnimar:movement [2019/04/24 21:54] (current) – sam
@@ Line 4: / Line 4: @@
 Adding some extra options for flying movement, to allow faster movement when descending.
+==== Falling Speed ====
+A falling creature moves vertically downwards at a speed of 600ft in the first round, and 2,000ft in subsequent rounds.
+Once you begin falling, it's a //Fly// DC 10 check to recover, but you are considered to have been //plummeting// at high speed the previous round (see below).
+==== Vertical Movement ====
+=== Descent ===
+When flying, for every 5ft you descend you can move an extra 5ft horizontally or downwards for free.
+=== Ascent ===
+For every 5ft you ascend, you must also move 5ft horizontally. This costs 10ft of movement.
+If you want to avoid the 5ft of horizontal movement when ascending, you must make a //Fly// check DC 20, but it still costs you 10ft of movement. You only make one check per round, at the point you first want to avoid the horizontal movement. If you fail by 5 or more, you fall 600ft if it's in your first move action, or 300ft if it's part of your second move action.
+==== Skill Checks ====
 ^ Flying maneuver                                      ^ Fly DC ^
@@ Line 11: / Line 31: @@
 | Turn 180° by spending 10 feet of movement            | 20  |
 | Fly up at a greater than 45° angle                   | 20  |
-| Make a triple move when plummeting                   | 20  |
-| Make a quadruple move when plummeting                | 30  |
-| Make a triple move when descending                   | 30  |
-| Make a triple move on level flight                   | 40* |
-| Make a quadruple move when descending                | 40* |
-* If this is attempted two rounds in a row, difficulty increases by +5 each round and become //fatigued// if fail.
-//Descending// means descending at more than a 45° angle. The following round, it is DC 10 to move less than full speed, DC 20 to move less than half speed and DC 30 to hover.
-//Plummeting// means descending directly down, no more than 5' horizontal movement per 30' of vertical movement. The following round, it is DC 10 to move less than a double move, DC 20 to move less than full speed, DC 30 for less than half speed and DC 40 to hover.